Snow Foam Gun V2 Ultimate Ceramic Care Kit

Detach any existing attachments from your garden hose and plug in the Snow Foam Gun's hose trigger.

Pull back the black ring on the end of the trigger and insert the Gun body to the trigger.

Attach the Sprayer Nozzle to the Brass Gun body and rotate to a desired horizontal or vertical spray.

Fill it with 800mL of water and 100mL of Snow Foam Detergent and enjoy!

The foam gun works by attaching it to your everyday garden hose. The water travels through the hose and gun, creating a wet foam that adheres to your vehicle. Our super concentrated Snow Foam detergent works perfectly with our snow foam gun. Simply foam, rinse, foam, scrub, rinse and dry for complete clean whilst minimising the risk of causing swirl marks and hazing.

The Snow Foam system of washing focuses on swirl-avoidance over contac-avoidance. We still scrub the car to dislodge stubborn dirt that the touchless pre-wash isn't able to remove. We do so with more confidence knowing a wash mitt isn't directly trying to forcefully wipe multiple layers of dirt like that of conventional washing methods.

The most important thing you can do to get the best results is to start with the best quality products. All snow foam products aren’t the same. Our snow foam gun and detergents are made to work together efficiently. Once you mix the detergent with water as instructed, attach it to the garden hose and adjust the dial to the preferred foaming consistency. Pull the trigger, and start snow foaming your car.

Foam, Rinse, Foam, Scrub, Rinse then Dry for a thorough wash.

Spray the car, from bottom to top to ensure you don't overlap layers.

The Snow Foam guns from Snowfoam Australia are designed to work with your everyday garden hose. Just fill it with 100mL of our Snow Foam Detergent and 800mL of water. Spray the foam on your car and let it sit for 5 to 10 minutes. For dirtier cars, you can use the two bucket method of car washing for better results with a microfibre wash mitt. Regularly washing your car with the foam gun will prevent dirt from sticking so you can prevent using buckets altogether.

Leave Snow Foam on for at least 5 minutes avoiding any sunlight if possible.

As a general rule, you want to rinse the first layer off before it dries onto the paint.

No, the Snow Foam Gun is specifically for garden hose use. Garden hoses provide around 50psi of pressure, which isn't enough for extremely thick foam. Instead the Gun shoots a wet foam similar to the consistency of a bucket wash. 

For the thickest foam available, please see our Snow Foam Lance options which require a pressure washer to accompany it. We recommend a 1800psi+ pressure washer with 8L/min flow rate.