A Washing Guide To Using Your Ultimate Care Kit

So you are ready to use every single item in your Snow Foam Ultimate Care Kit. Let's go through the exact process we would use to utilise each chemical and tool.

 

 

WHAT YOU WILL HAVE

1. Snow Foam Lance or Snow Foam Gun
2. Snow Foam Detergent
3. Snow Cloud Wash Mitt
4. Twister Towel
5. Microfibre Wheel Brush or Red Bristle Wheel Brush
6. Orange All Purpose Cleaner
7. Purple or Wheel Cleaner
8. Clear
9. Interior Cleaner
10. Shield Spray
11. Signature Spray Wax
12. Tyre Shine or Tyre Gel

WHAT YOU WILL ALSO NEED

• Microfibre towels x7

PREPARING TO WASH

1. Fill Snow Foam Lance bottle with 900mL water or Snow Foam Gun bottle with 800mL water.
2. Add 100mL of Snow Foam Detergent.
3. Shake mixture thoroughly.
4. Connect to your pressure washer or garden hose.

 

PRE-WASHING YOUR VEHICLE
We will be using in this part: Snow Foam Lance/Gun, Snow Foam Detergent, Purple/Wheel Cleaner, Microfibre Wheel Brush/Red Bristle Wheel Brush, Orange APC.

1. Shake your Wheel Cleaner or Purple before use.
2. Spray evenly on a wheel, ensure one wheel at a time.
3. Let chemical to sit for 2 minutes. Agitate with a Wheel Brush for Wheel Cleaner.
4. Rinse thoroughly with water before continuing onto another wheel.
5. Apply Orange APC on any sections that are severely contaminated such as exhaust, lower sections of the vehicle, or specific stains.
6. Let Orange dwell for 2 minutes and rinse thoroughly with water.
7. Take your Snow Foam Lance or Snow Foam Gun and spray in a horizontal motion, from bottom to the top of your vehicle.
8. Make sure you have half of the Snow Foam mixture remaining in the bottle so you can use in the washing process.
9. Let Snow Foam dwell for 5 - 10 minutes before rinsing thoroughly with water.

 

WASHING YOUR VEHICLE
We will be using in this part: Snow Foam Lance/Gun, Snow Foam Detergent, Snow Cloud Wash Mitt, Interior Cleaner.

1. Apply Snow Foam onto your vehicle.
2. Detach the Snow Foam Lance from the pressure washer or release the Snow Foam Gun from the trigger handle.
3. Use your Snow Cloud Wash Mitt and scrub one panel at a time.
4. Rinse the Snow Cloud Wash Mitt after each panel with your detached pressure washer or Snow Foam Gun while the Mitt is on your hand.
5. Continue this process until the entire vehicle is complete.

 

PROTECTING YOUR VEHICLE
We will be using in this part: Shield Spray, Signature Spray Wax, Tyre Shine/Tyre Gel, at least 3 microfibre towels.

1. Use Shield Spray while the car is wet and spray one panel at a time.
2. Buff into panel with a clean microfibre cloth.
3. Continue process on each panel.
4. Rinse entire vehicle thoroughly with water.
5. Dry the vehicle with your Twister Towel by spreading it across a panel by holding both corners on one side of the towel.
6. Shake Signature Spray Wax thoroughly before use.
7. Spray onto one panel at a time.
8. Buff into panel with a clean microfibre cloth.
9. Flip cloth and dry the buffed panel.
10. Continue until entire vehicle is completed.
11. Make sure tyres are dry before applying Tyre Shine or Tyre Gel.
12. Shake bottles before use.
13. Spray Tyre Shine directly onto tyre wall and wipe away excess overspray.
14. Apply a coin-sized dab of Tyre Gel on a cloth.
15. Apply on tyre wall evenly, and repeat process on each tyre.

 

CLEANING THE INTERIOR
We will be using in this part: Interior Cleaner, Clear, at least 4 microfibre towels, a vacuum cleaner.

1. Spray Clear lightly on window, one at a time. Use on inner and outer window as necessary.
2. Wipe area with a microfibre cloth.
3. Wipe clean with another microfibre cloth.
4. Repeat process if needed.
5. Spray Interior Cleaner directly on affected areas, such as seats, dashboards, carpets, trims, steering wheels etc.
6. Agitate with a microfibre cloth.
7. Wipe clean another clean microfibre cloth.
8. Repeat process until car is completely clean inside.
9. If possible, use a vacuum cleaner to remove physical debris in your interior.

 

Congratulations, you will now have completely cleaned the exterior and interior of your vehicle from dirt, grime, and stains. Stand back as all your efforts have brought out the best in your car. Take it for a drive, admire the gloss, do what you will now, and return to this guide if you need a reminder on the Ultimate Kit process.