Directions of Use:

For full set of instructions (Helmets, Boots, Gloves, Suits, Bags): Click Here

Helmet:

1. Remove visor (if possible without damaging).
2. Spray 8-12 sprays inside the helmet onto padding, never over saturate the padding/lining inside your helmet.
3. Wipe away any excess overspray from visor (if not removed) & the exterior of the helmet immediately with soap, water & a clean cloth.
4. Place helmet down on flat clean surface & allow to Revitalise to work its magic for 2 hours.
5. Flip helmet upside down & allow Revitalise to “air-out” for around 1-3 hours (place a soft & clean cloth/towel under helmet to prevent damage to exterior of helmet surface).
6. Touch inside of helmet padding & ensure the padding is dry.
7. Once padding is dry, wear helmet for at least 15 minutes before riding/driving to ensure the scent won’t make dizzy or nauseous (if it does, it means Revitalise has not fully evaporated yet, remove helmet & allow more time for Revitalise to fully evaporate).

If you prefer a stronger & longer lasting scent, repeat above steps however ensure Revitalise has fully evaporated before applying second layer. 

Keep note: Once Revitalise has dried/evaporated you should not have any skin contact issues. Being the nature of a helmet, we only recommend you apply a second layer if your helmet smells really bad or you really desire a really strong scent. Be extremely careful NOT to over saturate the helmet padding. Do not use a hair dryer to speed up the drying process.

You get 420+ sprays out of a single 125ml bottle as well as:

• 35-50 Helmets (8-12 sprays each helmet)
• 14-30 Pairs of shoes (7-15 sprays each shoe)
• 30-70 Pairs of gloves (3-7 sprays each glove)
• 10-20 Full suits (20-40 sprays per suit)
• 28-42 Average sized back packs (10-15 sprays per bag) 

Warnings